Achieving a professional, polished look during home renovation often comes down to the details. Unappealing gaps around trim, hairline wall cracks, or uneven seams near cabinetry can easily drag down the aesthetic of a freshly painted room.

LEVICO LVC-104 Acrylic Sealant provides an flexible, durable, and paintable solution designed to bridge these gaps seamlessly. Below are the primary areas where you can apply LEVICO LVC-104 to ensure clean lines and long-lasting protection.

Key Applications for LEVICO LVC-104

• Gaps Between Baseboards & Walls: Skirting boards rarely sit flush against plaster or drywall. Applying acrylic sealant along the top edge hides uneven gaps and creates a smooth transition for painting.
• Joints Around Door & Window Frames: Temperature shifts cause wood and masonry to expand and contract, leading to perimeter cracking. LEVICO LVC-104 absorbs this movement while blocking drafts.
• Sealing Cabinetry to Walls: Kitchen and bathroom fitted furniture often leaves noticeable gaps against backwalls. A bead of sealant along these edges prevents dust accumulation and creates a built-in finish.
• Cracks in Wall Corners & Plaster: Hairline stress cracks frequently develop along internal room corners. Filling them with flexible acrylic sealant prevents the crack from showing through your topcoat of paint.
• Gaps in Molding & Crown Molding: Architectural trim features multiple joints. Using sealant along ceiling moldings and decorative trims masks seams for a continuous, custom-built look.
• Small V-Grooves in Trim & Woodwork: Detailed wood joinery often features small channels or grooves that collect grime over time. Filling and smoothing these grooves ensures a pristine paint application.

Why Choose LEVICO LVC-104?

Feature	Practical Benefit
Fully Paintable	Accepts both water-based and solvent-based paints without cracking or discoloration.
Flexible Adhesion	Accommodates minor structural movement without losing bond strength.
Waterproof Protection	Guards internal joints against ambient moisture and moisture penetration.
Easy Clean-Up	Excess material washes away easily with water before curing.

Application Tips for Best Results

1. Surface Preparation: Ensure the substrate is clean, dry, and completely free of dust, grease, or old peeling sealant.
2. Smooth Execution: Cut the nozzle at a 45-degree angle matching the width of your target gap. Apply steady pressure with a caulking gun.
3. Tooling: Smooth the bead within 5 to 10 minutes using a wet finger, caulking tool, or damp sponge before a skin forms.
4. Painting: Allow the sealant to skin over and fully dry according to package directions before applying your topcoat.